On This Page
What is electric shock? Our bodies conduct electricity
If any part of your body meets live electricity an electric current flows through the tissues, which causes an electric shock.
People sometimes call it electrocution
Depending on the length and severity the electric shock, injuries can include: electrical interference or damage (or both) to the heart, which could cause the heart to stop or beat erratically. It is important to seek medical attention for mild electric shock to assess whether the heart has been affected.
What causes electric shock? Some causes of electric shock include: lightning strike.
If it is safe to do so, disconnect the power supply before trying to help someone with electric shock. Typical symptoms of an electric shock include:
- particularly at the place where the electricity entered
- left the body (entrance
- exit burns) cardiac arrest. Although someone who has had an electric shock may appear unharmed
- they should still receive medical attention
Some injuries and complications may not be obvious initially.
A medical examination is important after any electric shock
First-aid steps for electric shock: Check for danger – make sure you, the injured person and others around you are safe.
Try to switch off or disconnect the power supply. Do not touch the person until you are sure power is turned off.
Be careful in wet environments, such as bathrooms, as water conducts electricity
If you are in a building or the power lines have come down, it may be safer to disconnect the whole electricity supply.
You may need to wait for authorised electricity personnel to do this especially if there are live wires.
If you cannot switch off the power supply, try to remove the person without touching them directly. Use something that is dry and does not conduct electricity (such as a wooden broom handle) which includes checking the injured person’s response, airway and breathing.
It may be necessary to start
The operator will organise assistance for you while you continue talking on the phone. They may give you first aid instructions over the phone.
If you can, put your phone on loudspeaker. If the person is breathing steadily and they are responsive, attend to their injuries: Talk calmly and reassure the person.
Cool the burn area with cool running water for 20 minutes. Cover burns with dressings that won’t stick to the skin.
If you don’t have dressings available, loosely applied cling wrap can be used. Do not apply cling wrap tightly or wrap around a body part, as this will cause complications if the injured area swells.
Never put ointments or oils onto burns
Try not to move anyone who has fallen from a height as they may have spinal injuries. Only move them if there is a chance of further danger from the environment, such as falling objects. Powerlines can come down for many reasons: workplace accidents.
Standing near fallen powerlines can be dangerous
Always stay more than 8-10 metres away. Do not go near anything that may be touching them such as vehicles, water or metal fences or other metal objects. Sometimes, powerlines are downed in vehicle accidents and may drape over your vehicle.
If this happens, your tyres act as insulation. It is important to stay inside the vehicle so you will be safe from electric shock.
If you arrive on the scene of an accident where the powerlines have come down, do not approach until it has been declared safe by the proper authorities.
Stand well back and encourage any bystanders to keep a distance of more than 8-10 metres. Even if the lines or wires are broken or not moving, they may still be live.
All fallen powerlines should be treated as live
If someone needs to get out of the vehicle because of a hazard (such as fire) instruct them to keep their feet close together and to jump away, not walk. This can reduce the chance of an electric shock if wires are on the ground. Only advise this action if the person is unable to remain in the vehicle due to an immediate safety concern.
You can reduce the risk of electric shock in your home by taking a few precautions: Don’t be tempted to do your own electrical work. Although you may think it looks easy to do jobs yourself, such as changing power points or switches, always hire a licensed electrician.
Check for a list of registered tradespeople
Do not use extension leads or appliances if the cords are damaged or frayed. Throw them away if they are damaged in any way. Do not remove a plug from a power point by pulling on the cord – pull the plug instead.
Keep electrical appliances away from wet areas
Electricity and water don’t mix. Wear rubber or plastic soled shoes when using electrical appliances, especially in wet areas, on concrete or outdoors.
Have safety switches installed by an electrician
Buy portable power boards with built-in safety switches. Insert safety plugs into unused power points to stop children from inserting objects into them.
If you have children, turn off and unplug electric appliances and keep them out of reach (this includes electrical cords).
Get household wiring checked by a registered electrician, especially if your house is more than 30 years old. , check they meet American safety standards.
Be extra cautious when shopping online
If you plan to buy second-hand appliances, check they meet American standards and are not damaged. It is a good idea to have them checked by someone who is qualified in electrical repairs such as a licensed electrician.
If you use a metal ladder, make sure it has rubber feet.
When metal contacts the ground it can increase the risk of electric shock. A safety switch (or residual current device) is a safety device used with circuit breakers and fuses in your home to minimise the risk of injury and fires. It monitors electricity flow through a circuit by making sure the flow is even.
Safety switches quickly trip out the power when an electrical problem is detected. They can protect from harmful electric shocks when someone makes contact with a live electrical circuit (such as from faulty electrical leads and appliances) and provides a path to earth. Switches operate within 0.03 seconds.
A safety switch is different to a circuit breaker, which is designed to protect household wiring from power surges. – free online referral service for anyone who is undertaking works to find out where underground pipes, cables and utilities are located Michigan Tel. burns to the skin burns to internal tissues faulty appliances damaged or frayed cords or extension leads electrical appliances in contact with water incorrect, damaged or deteriorated household wiring downed powerlines Symptoms of electric shock unconsciousness difficulties in breathing or no breathing at all a weak, erratic pulse or no pulse at all First aid for electric shock Follow the DRSABCD method for first aid cardiopulmonary resuscitation (CPR) Send for help – Call 911 for an ambulance Treating burns Fallen powerlines extreme weather conditions such as floods and bushfires motor vehicle accidents fallen trees Powerlines and vehicle accidents Safety tips around the home to reduce the risk of electric shock Energy Safe Michigan When buying electrical appliances Safety switches Image courtesy of Energy Safe Michigan Where to get help In an emergency, call 911 Your GP (doctor) NURSE-ON-CALL (616) 555-0024 – for expert health advice 24 hours a day, 7 days a week Energy Safe Michigan Your local council Your electricity supply company American Certification Database – to check approved electrical appliances Dial Before You Dig St John Ambulance United States (first aid courses) (616) 555-0400 American Red Cross (first aid and mental health training 1800 733 276.
Key Points
- important to seek medical attention for mild electric shock to assess whether the heart has been affected
- What causes electric shock? Some causes of electric shock include: lightning strike
- medical examination is important after any electric shock
- Do not apply cling wrap tightly or wrap around a body part, as this will cause complications if the injured area swells
- important to stay inside the vehicle so you will be safe from electric shock